Famous_Longwing/88x2bu-20210702
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

updated docs

Browse Source
This commit is contained in:
morrownr 2021-11-09 13:20:46 -06:00
parent 5b8a610b06
commit f8e42e58f8
1 changed files with 13 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
Bridged_Wireless_Access_Point.md
View File

@ -1,4 +1,4 @@
2021-11-04
2021-11-09
## Bridged Wireless Access Point
@ -85,7 +85,8 @@ Note: For USB3 adapters based on the Realtek rtl8812au, rtl8812bu and rtl8814au
chipsets, the following module parameters may be needed for best performance
when the adapter is set to support 5 GHz band: (if using a rtl8812bu based
adapter with a Raspberry Pi 4B or 400, you may need to limit USB mode to USB2
due to a bug that causes dropped connections--rtw_switch_usb_mode=2)
due to a bug, probably in the Raspberry Pi 4B, that causes dropped connections--
rtw_switch_usb_mode=2)
```
rtw_vht_enable=2 rtw_switch_usb_mode=1
@ -278,11 +279,11 @@ interface=wlan0
bridge=br0
driver=nl80211
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
#ctrl_interface=/var/run/hostapd
#ctrl_interface_group=0
ieee80211d=1
# Support DFS channels
# Enables support for 5GHz DFS channels
#ieee80211h=1
beacon_int=100
@ -330,10 +331,10 @@ wmm_enabled=1
# mt7612u - mt7610u
#ht_capab=[HT40+][HT40-][GF][SHORT-GI-20][SHORT-GI-40]
#
# rtl8812au - rtl8814au - rtl8811au
# rtl8812au - rtl8814au - rtl8811au - rtl8811cu
#ht_capab=[HT40+][HT40-][SHORT-GI-20][SHORT-GI-40][MAX-AMSDU-7935]
# rtl8812bu
ht_capab=[LDPC][HT40+][HT40-][SHORT-GI-20][SHORT-GI-40][RX-STBC1][MAX-AMSDU-7935]
ht_capab=[LDPC][HT40+][HT40-][SHORT-GI-20][SHORT-GI-40][MAX-AMSDU-7935]
#
# IEEE 802.11ac
@ -344,16 +345,14 @@ ieee80211ac=1
# mt7612u
#vht_capab=[RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][MAX-A-MPDU-LEN-EXP3][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]
#
# rtl8812au
#vht_capab=[MAX-MPDU-11454][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][SU-BEAMFORMER][SOUNDING-DIMENSION-2][HTC-VHT][MAX-A-MPDU-EXP7]
# rtl8812bu
vht_capab=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][HTC-VHT][MAX-A-MPDU-LEN-EXP7]
# rtl8812au - rtl8812bu
vht_capab=[MAX-MPDU-11454][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][HTC-VHT][MAX-A-MPDU-LEN-EXP7]
# rtl8814au
#vht_capab=[MAX-MPDU-11454][SHORT-GI-80][SU-BEAMFORMER][HTC-VHT]
# rtl8811au
# rtl8811au - rtl8811cu
#vht_capab=[MAX-MPDU-11454][SHORT-GI-80][RX-STBC-1][HTC-VHT][MAX-A-MPDU-LEN-EXP7]
#
# Note: [TX-STBC-2BY1] may cause problems
# Note: [TX-STBC-2BY1] may cause problems with some Realtek drivers
#
# Required for 80 MHz width channel operation
vht_oper_chwidth=1
@ -424,6 +423,7 @@ File contents
# /etc/hostapd/hostapd-2g.conf
# Documentation: https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf
# 2021-11-02
# SSID
ssid=myPI-2g
# PASSPHRASE
@ -478,8 +478,6 @@ wmm_enabled=1
# Note: Only one ht_capab= line should be active. The content of these lines is
# determined by the capabilities of your adapter.
#
# Need to add RasPi4B internal wifi information
#
# RasPi4B internal wifi
ht_capab=[HT40+][HT40-][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
#